India's Trusted Conveyor Solutions Partner — 40+ Years of Expertise +91-9323588809  |  sales@bindalbelting.com

Rotary Screen Printing Machine Blanket

ConveyPro Systems · Textile Printing Blankets

Endless, low-stretch printing blanket for continuous rotary-screen printing ranges — built for steady speed under the screens and dimensional stability over long runs.

On a rotary range the blanket runs continuously under every screen, so any stretch or thickness variation changes fabric speed and throws colours out of register. A multi-ply polyester carcass, an even-thickness face and a flat, well-made joint keep long runs on register.

Track the blanket with the snub or steering rollers rather than relying on edge guides, tension it in stages to the machine maker's elongation figure, and trim the edges after running-in so guiding sensors read a straight edge.

Specifications

BrandConveyPro Systems
MaterialPU (TPU) or synthetic-rubber face on a multi-ply polyester carcass
Construction2–3 ply, low-stretch; inextensible tension layer option for long or wide blankets
ThicknessApprox. 2.1–3.5 mm (grade-dependent)
WidthTo machine face width, typically 1800–3600 mm
LengthEndless, made to machine length
SurfacePrecision-ground, even-thickness matt face
Glue CompatibilityThermoplastic / permanent-tack and water-soluble adhesives
JointEndless hot-pressed finger (zig-zag) joint
OptionsTrimmed edges for sensor guiding, edge sealing

Key features

Rotary screen 2–3 ply polyester Endless finger joint Thermoplastic glue Up to 3600 mm wide

Industries

Textile

Frequently asked questions

Machine make and model, face width, endless length (or roller centres), current blanket thickness, glue type and washer type. A photo of the old blanket's joint and edge helps.

A blanket moves towards its slacker side. Correct it with the steering or snub rollers and even out the tension; guide blocks should only correct small drift.

More textile printing blankets

See all 6 textile printing blankets →